Victa advises precautions to home owners using chainsaws following NSW storms
With recent wild weather having felled thousands of trees across eastern NSW, experts warn against taking a casual approach to post-storm clean-ups.
Leading Australian garden care expert Victa advises that chainsaw owners should take key precautions if attempting to clear debris themselves.
With serious injury a possible consequence of incorrect chainsaw use, they recommend the following safety tips when either limbing (removing branches from
a downed tree) or bucking (cutting the trunk of a downed tree to length). It’s vital to follow these tips and also refer to your operator’s manual,
otherwise serious injury could occur.
- Protective equipment: Always opt for sturdy boots, long pants, long-sleeve shirt, gloves, ear and eye protection, and Kevlar chainsaw
chaps. Hard hats are also a great idea, especially in a storm-ravaged environment.
- Pre-cut checklist: Before you even start the chainsaw, make sure everything is in working order. Undertake a quick check of the controls,
handles, bar, chain sharpness and tension. For petrol powered chainsaws, don’t forget to fill both the petrol and bar oil reservoirs. Running out
of bar oil will cause friction that could damage your saw.
- Handling the saw: Maintain a solid footing and watch out for dangerous tripping hazards. Also maintain a good balance by not overreaching
with the saw or assuming an uncomfortable body position while cutting. Ensure that your left hand (including your thumb) is firmly positioned around
the front handle for full control. Always stand to one side of the saw – never directly behind it. Start all cuts with a full throttle before touching
the wood, and never cut above shoulder height.
- Chain tension: Re-check it after every hour of use and adjust if necessary. Due to stretching, new chains need to be checked after
20 minutes.
- Monitoring the tip: Be aware of the tip position at all times and never engage the saw with the upper corner of the bar. This is essential
for guarding against kickback, which occurs when the top corner of the bar tip hits something hard or becomes pinched. In these instances, the
energy of the saw forces the bar up and towards the operator with great speed and power.
- Moving around: It’s crucial that you don’t move around with the chainsaw running. In the event you trip or stumble, the engine can
accelerate and start the chain spinning.
- Be aware of others: Instruct others to never blindly approach you while you’re operating the chainsaw – and never cut trees/branches
alone. It’s also integral that bystanders and animals are a minimum of 20 metres from the hazard zone (i.e. where you are using the chainsaw).
If an accident occurs, you’ll need someone to administer first aid as well as summon medical assistance. That’s also the reason to keep your mobile
phone with you while cutting.
For specific information on your chainsaw and its operation refer to the operator’s manual.
Victa garden and lawn care equipment is available from leading outdoor power equipment specialists. Call 1800 356 632 or visit www.victa.com.au to find your local stockist.
463 total views, 1 today
463 total views, 1 today